Nokia Secret Codes ေတြကို ဖုန္းဆိုင္ေတြနဲ႔ ဖုန္း အေၾကာင္းေလ့လာေနၾကတဲ႔ သူငယ္ခ်င္းမ်ား ေလ့လာလို႔ရေအာင္ ျပန္လည္မွ်ေဝေပးလိုက္ပါတယ္...:)
All useful codes for Nokia mobiles
On the main screen type in:
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display(operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start)
*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345
Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin# \
*#7328748263373738# resets security code.
Default security code is 12345
Change closed caller group (settings - security settings -user groups) to 00000 and ure phone will sound the message tone when you are near a radar speed trap. Setting it to 500 will cause your phone 2 set off security alarms at shop exits, gr8 for practical jokes! (works with some of the Nokia phones.) Press and hold "0" on the main screen to open wap browser.
* *3370# This Nokia code activates Enhanced Full Rate Codec.
* #3370# Deactivate Enhanced Full Rate Codec (EFR) .
* *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
* 12345 This is the default security code .
* *#06# For checking the International Mobile Equipment Identity (IMEI Number) . This can be used with almost every Mobile Phone i.e Samsung, SE, LG etc.
* *#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
* *#4720# With this Nokia code you can deactivate the Half Rate Codec.
* *#9999# Phones software version if *#0000# does not work.
* #pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
* #pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols) .
* #pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols).
* #pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols) .
* *#147# This lets you know who called you last (Only vodofone).
* *#1471# Last call (Only vodofone) .
* *#21# This phone code allows you to check the number that “All Calls” are diverted to.
* *#2640# Displays phone security code in use .
* *#30# Lets you see the private number.
* *#43# Allows you to check the “Call Waiting” status of your cell phone.
* *#61# Allows you to check the number that “On No Reply” calls are diverted to .
* *#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to .
* *#67# Allows you to check the number that “On Busy Calls” are diverted to
* *#67705646# Phone code that removes operator logo on 3310 & 3330
* *#73# Reset phone timers and game scores.
* *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible .
* *#7760# Manufactures code.
* *#7780# Restore factory settings. With Some Models *#7370#
* *#8110# Software version for the nokia 8110.
* *#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
* *#94870345123456789# Deactivate the PWM-Mem.
* **21*number# Turn on “All Calls” diverting to the phone number entered.
* **61*number# Turn on “No Reply” diverting to the phone number entered .
* **67*number# Turn on “On Busy” diverting to the phone number entered .
* press and hold # Lets you switch between lines.
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # lub * # 9 9 9 9 #
Sim lock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4
1234567890 - MasterCode which is generated from IMEI
phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370#
*#4720# Activate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# Deactivate Half Rate Codec.
(5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.
*#9999# Phones software version if *#0000# does not work.
*#06# For checking the International Mobile Equipment Identity (IMEI Number).
#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w”and “+” symbols).
#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w”and “+” symbols).
#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w”and “+” symbols).
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” Go to Topand “+” symbols).
*#147# (vodafone) this lets you know who called you last.
*#1471# Last call (Only Vodafone).
*#21# Allows you to check the number that “All Calls” are diverted to
*#2640# Displays security code in use.
*#30# Lets you see the private number.
*#43# Allows you to check the “Call Waiting” status of your phone.
*#61# Allows you to check the number that “On No Reply” calls are diverted to.
*#62# Allows you to check the number that “Divert If Unreachable (no service)” calls are diverted to.
*#67# Allows you to check the number that “On Busy Calls” are diverted to.
*#67705646# Removes operator logo on 3310 & 3330.
*#73# Reset phone timers and game scores.
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop
Allowed”, it means you will get the best standby time possible.
*#7760# Manufactures code.
*#7780# Restore factory settings.
*#8110# Software version for the nokia 8110.
*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. ( Favorite )
*#94870345123456789# Deactivate the PWM-Mem.
**21*number# Turn on “All Calls” diverting to the phone number entered.
**61*number# Turn on “No Reply” diverting to the phone number entered.
**67*number# Turn on “On Busy” diverting to the phone number entered.
12345 This is the default security code.
press and hold # Lets you switch between lines
NOKIA5110/5120/5130/5190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4
NOKIA 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
NOKIA3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
NOKIA 3330
*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#
This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#
Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you’ll be presented with the programming menu.
2) Select “NAM1″
3) Select “PSID/RSID”
4) Select “P/RSID 1″
Note: Any of the P/RSIDs will work
5) Select “System Type” and set it to Private
6) Select “PSID/RSID” and set it to 1
7) Select “Connected System ID”
Note: Enter your System ID for Cantle, which is 16401 or 16423. If you don’t know yours, ask your local dealer for it.
 Select “Alpha Tag”
9) Enter a new tag, then press OK
10) Select “Operator Code (SOC)” and set it to 2050
12) Power down the phone and power it back on again
11) Select “Country Code” and set it to 302 for Canada, and 310 for the US.
0 comments:
Post a Comment